
This full aluminium enclosure for Single Board Computer (SBC) is designed for industrial environment but it is also a great all rounder case for any user. One unique feature of this case is a hole that you can mount an external antenna. Replacing the on-board antenna with an external antenna will produce an increase in signal strength which will bring more range for WiFi connection. You will need an antenna connector cable and the external antenna itself. They are not included and sold separately.
The case is made of 3 pieces of sandblasted aluminium, the top, the body and the bottom and they are held together by screws. All major ports (USB, ethernet, power, HDMI and audio) are accessible. There is also cut-out for micro SD card and an openings where you can slot out GPIO wires and camera/display ribbon cable. All ports and slots are labelled accordingly.
To install your SBC to this case, first place the board to the body of the case. You have to tilt the board slightly and make sure the HDMI connector is mounted properly to the body. Then place the bottom part of the case and screw your board to it. Finally screw in the top part of the case.
This case is not suitable for Raspberry Pi 4.
Technical details: