Six ultra bright LEDs mounted on a board which can be plugged into a regular USB port to give you lighting. This LED stick has a touch sensitive area on the back whereby you can turn the LEDs on/off and change the brightness with just a touch of your finger. The board has USB leads on both sides. That means, you can plug it either way!
It's super portable - Carry it in your pocket, put it in your wallet, chuck it in your glove compartment or hang it together with your keys. With USB port available almost everywhere, you won't have a problem to use it.
This stick can also be used without USB port. Just connect power source to the +5V and GND lead on the stick (check USB standard pinout specification) for lighting.
This USB LED stick gives you cool white lighting. Confused between cool white and warm white? Cool white LED is brighter of the two. It appears more bluish. On the other hand, warm white looks closer to yellow, similar to incandescent light.
* Each order is for 1 USB LED stick
Touch control operation:
Turn the LEDs ON or OFF: Tap your finger lightly at the back of the module to turn it on. Tap once again to turn it off
Change the brightness: Put your finger on the touch area and stay there until the brightness changes. Remove your finger once the desired brightness is acheived. The LEDs go from dark to bright and bright to dark alternately.
