This case is designed by the Raspberry Pi Foundation specifically for Raspberry Pi Zero and Raspberry Pi Zero W.
The sleek case comes in two-tone colour - white and raspberry red. The mini HDMI, USB OTG and power port is accessible at the side of the case.
The top white lid is removable and there are three different lids included. The Raspberry Pi logo is etched prominently on all the lids.You can snap on the lid according to how you use the Pi Zero. There is the standard lid where the top of the case is covered. Then there is a lid with cut-out above GPIO pins to make them more accessible for wiring. Lastly there is a lid with a hole in the middle and you can mount the official Pi Camera to it. A short flex camera cable is included for this purpose.
The micro SD card is not accessible from outside, so you need to remove the Pi Zero board from the case if you want to swap the micro SD card.
What's included:
Three different top white lid
A bottom red base
A short Pi Zero camera cable
Four anti-slip rubber feet
This case is compatible with Raspberry Pi Zero, Zero W and Zero WH (only with GPIO top lid).
*Raspberry Pi Zero/Zero W and Pi Camera board are not included
