Lower power consumption and minimal hardware footprint!
Odroid-C0 is a stripped down version of the Odroid-C1+, geared towards mobile, wearable, IoT and lightweight applications. For flexibility, most of the connectors are not populated so that you can choose and solder only the one that you need.
This board requires power to be provided via the 2.5 x 0.8mm DC jack. Alternatively, there is a 1.25mm pitch, 2-pin connector for you plug a lithium battery for power. There is also a power switch so that you can turn ON/OFF the board easily. The battery connector, charging circuit and power switch are new to C0 that is not available on the C1+.
Like the C1+, there is a micro SD slot and eMMc socket for storage. A regular-size HDMI jack is also present for video output.
The Odroid-C0 is software compatible with the C1+ / C1.
