Raspberry Pi (Pi2B, A+ and B+) has four holes at the corner that you can use for mounting. The older Model A and B have two.
These nylon screws and nuts fit nicely with the mounting holes of the Raspberry Pi. They are gentler on the boards and weigh lesser compared to the metal screws. With these, you can mount your Raspberry Pi to a DIY case or project enclosure for a more secure attachment.
We have tested them to fit other boards such as Beaglebone Black and Odroid-C1 as well, but they don't fit mounting holes of the Pi camera module which are slightly smaller.
Each pack has four screws and four matching nuts.
Technical details:
Screw: Nylon, M2.5, Phillips style, 2.5mm diameter, 10mm long
