The popular minimalist case now comes with a cooling fan!
This is a two-piece injection moulded case for your Raspberry Pi 3 B, 2 B, B+ and ASUS Tinker Board. The simple case top and bottom that press-fit together and the smooth rounded corners give a minimalist look to the case. This case come with a mini cooling fan that can be mounted to the top cover either on the inner or outer part of the case.
Note for ASUS Tinker Board usage: If you use the stock heat sink, there is no room to mount the cooling fan inside the case. You have to mount it outside instead (see pictures).
To use the case, secure the board to the base of the case with four screws. Snap on the case top to give protection to your Pi. If you want to poke around, the top can be detached easily. The top cover has openings for cooling fan, DSI, CSI and GPIO pins. The base has ventilation openings and mounting slots that you can use to mount the case vertically to a wall for example. Four non-slip rubber feet are included that you can attach to the outer part of the base.
This case is for Raspberry Pi 3 B, 2 B, B+ and ASUS Tinker Board. It is NOT compatible with the Raspberry Pi 4.
If you are looking for a similar case for Raspberry Pi 4 Model B, click here.
*Raspberry Pi/Tinker Board is not included
Features:
Two-piece construction, base and top, moulded in a smooth finish ABS plastic
Four screws holding the board into position allowing it to be operated with or without the cover in place
A mini cooling fan (30x30 mm) can be mounted to the top cover
Top cover can be easily removed without the need to unplug any cables
Top cover has openings for DSI, CSI and GPIO cabling/wiring
The base has two screw slots to allow the enclosure to be vertically mounted
Vented base to allow through air flow
Mini cooling fan, mounting screws and nuts and four non-slip rubber feet are included
Compatible with Raspberry Pi 3 B, 2 B, B+ and ASUS Tinker Board only
