This is a two-piece injection moulded case for your Raspberry Pi 3 B, 2 B, B+ and ASUS Tinker Board. The simple case top and bottom that press-fit together and the smooth rounded corners give a minimalist look to the case.
To use the case, secure the board to the base of the case with four screws. Snap on the case top to give protection to your Pi. If you want to poke around, the top can be detached easily.
The top cover has openings for DSI, CSI and GPIO pins. Ports name/function are embossed appropriately for easy reference.
The base has ventilation openings and mounting slots that you can use to mount the case vertically to a wall for example. Four non-slip rubber feet are included that you can attach to the outer part of the base.
There are three colours for you to choose: transparent, glossy black and glossy white.
This case is for Raspberry Pi 3 B, 2 B, B+ and ASUS Tinker Board. It is NOT compatible with the Raspberry Pi 4.
*Raspberry Pi board is not included
Features:
Two-piece construction, base and top, moulded in a smooth finish ABS plastic
Four screws holding the board into position allowing it to be operated with or without the cover in place
Top cover can be easily removed without the need to unplug any cables
Top cover has openings for DSI, CSI and GPIO cabling/wiring
The base has two screw slots to allow the enclosure to be vertically mounted
Vented base to allow through air flow
Four non-slip rubber feet are included
Compatible with Raspberry Pi 3 B/B+, 2 B, B+ and ASUS Tinker Board only
Comes in 3 colour options - transparent, black and white
