This is a two-piece injection moulded case for your Raspberry Pi 3 Model A+. The simple case top and bottom that press-fit together and the smooth rounded corners give a minimalist look to the case.
To use the case, secure the Raspberry Pi to the base of the case with four screws. Snap on the case top to give protection to your Pi. If you want to poke around, the top can be detached easily.
The top cover has openings for DSI, CSI and GPIO pins. Ports name/function are embossed appropriately for easy reference.
The base has ventilation openings and mounting slots that you can use to mount the case vertically to a wall for example. Four non-slip rubber feet are included that you can attach to the outer part of the base.
There are two colours for you to choose: transparent or glossy black.
This case is for Raspberry Pi 3 or 1 Model A+ only and not compatible with other Raspberry Pi models.
*Raspberry Pi board is not included
Features:
Two-piece construction, base and top, moulded in a smooth finish ABS plastic
Four screws holding the Raspberry Pi board into position allowing it to be operated with or without the cover in place
Top cover can be easily removed without the need to unplug any cables
Top cover has openings for DSI, CSI and GPIO cabling/wiring
The base has two screw slots to allow the enclosure to be vertically mounted
