This is a two piece injection moulded clear case for your Raspberry Pi. The smooth rounded corners give the minimalist look to the case. This product is for older Raspberry Pi 1 Model A and B and not compatible with Raspberry Pi 2B, Model A+, Model B+ and other newer models.
The Raspberry Pi board can be attached to the base via the mounting holes using the included two screws. The base also has its own mounting holes that you can use to mount the case vertically to a wall for example.
The top cover has openings for DSI, CSI and GPIO pins. Ports name/function are embossed appropriately for easy reference. The top can be attached easily to the base. Alternatively you can just leave it off if you want to tinker with your Pi.
*Raspberry Pi board is not included
Features:
Two-piece construction, base and top, moulded in a smooth finish ABS plastic
Base has side clips which securely hold the Raspberry Pi board into position allowing it to be operated with or without the cover in place
Base features two screw slots to allow the enclosure to be vertically mounted
Top cover can be easily removed without the need to unplug any cables
Top cover has openings for DSI, CSI and GPIO cabling/wiring
