This is a two-piece ivory white injection moulded case for your Raspberry Pi Model B+. The case top, bottom and the Pi board are fasten together by 4 screws. All edges are chamfered for more elegant look.
To use the case, place the Raspberry Pi to the base of the case. Snap on the case top and fasten the four screws from the bottom.
All main ports like USB, ethernet, HDMI, audio and power are accesible. There is also a small opening at the micro SD card slot so that you can insert and retrieve the card using fingernail or a tool like a tweezer. Next to that is another small opening for visibility on the Pi's status LEDs. The top cover has openings for DSI, CSI and GPIO pins for easy wiring.
Four non-slip rubber feet are included that you can attach to the bottom part of the base.
This case is for Raspberry Pi 2 B and Model B+ and not compatible with Model A/B.
It fits Raspberry Pi 3 board as well, but the status LED will not be visible.
*Raspberry Pi board is not included
Features:
Two-piece construction, base and top, moulded in a smooth finish ivory white ABS plastic
Four screws holding the case top, bottom and Raspberry Pi board together
Top cover has openings for DSI, CSI and GPIO cabling/wiring
